One - stop EMS Solution Provider

GPS Tracker Circuit PCBA Board

Data Sheet

GPS Tracker Circuit PCBA Board

Name: GPS Tracker Circuit PCBA Board

The number of layers that can be copied: 1-32 layers

Minimum line width and line spacing: 3mil

Minimum laser aperture: 4mil

Minimum mechanical aperture: 8mil

Copper foil thickness: 18-175цm (standard: 18цm35цm70цm)

Peel strength: 1.25N/mm

Minimum punching hole diameter: single side: 0.9mm/35mil

Minimum hole diameter: 0.25mm/10mil

Aperture tolerance: ≤φ0.8mm±0.05mm

Hole tolerance: ±0.05mm

Hole wall copper thickness: double-sided/multi-layer: ≥2um/0.8mil

Hole resistance: double-sided/multi-layer: ≤300цΩ

Minimum line width: 0.127mm/5mil

Minimum pitch: 0.127mm/5mil

Surface treatment: rosin spray tin electric gold, anti-oxidation, chemical gold, carbon oil

Warpage: ≤0.7%

Product Details

The Global Positioning System (GPS) is a high-precision radio navigation positioning system based on artificial earth satellites. It can provide accurate geographic location, vehicle speed and Precise time information. Since its inception, GPS has attracted many users with its high precision, all-weather, global coverage, convenience and flexibility. GPS is not only the patron saint of automobiles, but also the wisdom of logistics industry management. With the rapid development of the logistics industry, GPS has played a pivotal role and has become the second largest consumer group after the automobile market.

GPS PCB antennas come in two forms: active and passive. Active antennas have a low noise amplifier (LNA) built into the module, while passive antennas do not include an amplifier. Active antennas are on their own board and are connected to your printed circuit board via coaxial cables.

Get Free DFM Check and Sample

DFM inspection report available within 3 hours, PCBA quotation provided within 24 hours, sample fee refunded after placing an order.

Other Contact Information